home.•.products.•.instructions.•.FAQ •.orders.•.portfolio.•.links.•.store.

inkAID Clear Gloss Precoat Type II

Basic Application Directions

Clear Gloss Precoat Type II contains an adhesive and can be applied to any surface or substrate that can be fed safely through your printer. It is especially useful when you want to print on clear plastic, colored plastic, metals or any non pourous surface. It is used when you want to shorten the time between coating and printing on hard surfaces. It can also be used on porous surfaces like paper.

Important: This product is NOT a mixture of the gloss inkAID and inkAID adhesive. It is a unique formulation that cannot be replicated by mixing other inkAId products.

Note that this precoat works successfully with printers with wheels or guides (also known as "pizza wheels") ONLY IF the surface of the substrate is porous, like paper. If applied to a non-porous surface like plastic, “pizza wheels” can drag across the printed surface and damage the print or gum up the printer. When using printers without these wheels, (most large format printers) you do not need to be concerned about the porosity of your surface.

return to instructions

Directions: Applying the Clear Gloss Type II Precoat

1. Check MSDS for Clear Gloss Type II Precoat for safety instructions in handling this product. Wear protective gloves.

2. Stir before applying.

3. Brush onto surface making a light and even coating of inkAID Type II. Foam brushes give a smoother coat than bristle brushes.

4. Allow the first coat to dry thoroughly.

5. Apply as second coat. Non porous surfaces, like metal, needs a good layer of coating which aids in ink drying. It is a good idea to brush in a direction perpendicular to your first coat. Clean up with soap and water.

6. When all coats have dried to the touch the sheet is ready for printing. (inkAID side up!)

7. Some experimentation may be necessary to get your settings right for optimal color, especially if you are working on a non-white surface where the inkjet colors will be mixing with the surface color. Use “semigloss or enhanced matte” paper settings as a starting point.

8. Let your print dry a day or two before any post coat is applied. You can fix the surface with a spray-on fixative like those by Krylon Crystal Clear. After fixing completely, you can coat it with acrylic medium for further protection or work over the print with natural media.

For questions regarding application suitability or usage, or to receive inkAID news contact support.

Disclaimer of Warranty
Because of the diversity of conditions, materials and/or equipment under which these products may be used, they are sold without any express or implied warranties whatsoever as to performance or merchantability. The suitability of any product for an intended purpose shall be solely determined by the user.

No inkAID representative has the authority to wave or change these provisions, which apply to all sales. Any liability of seller, agent, parent company, other affiliates, or manufacturer will be limited exclusively to product replacement or refund of the purchase price.